Chocolate Bundt Cake Recipe (2024)

FAQs

What is the secret to getting a Bundt cake out? ›

The Best Trick For Releasing a Cake From a Bundt Pan

Usually the cake likes to cling to the tube in the middle, so nudging it loose there can be all it takes. After doing this, carefully flip the bundt pan over and lightly shake it.

The bakery is known for its unique take on bundt cakes. The Secret Recipe: The secret recipe of Nothing Bundt Cakes revolves around quality ingredients, including flour, sugar, eggs, and a unique addition — sour cream. Sour cream adds moisture and a subtle tanginess to the cake, making it stand out.

Bundt Cake Pan Capacity

Traditional Bundt cake pans hold 12-cups of batter, which is the perfect two-cake cake mix size. Most recipes that make 10 to 12 cups of batter will fit perfectly in most bundt cake pans.

Cool Before Flipping

When you remove your cake from the oven, don't flip it out of the pan right away! Instead, let the cake cool for ten minutes in the pan. Then, placing the wire rack over the base of the cake, invert the pan.

Allow the Cake to Cool

Once you've cooked your bundt cake and removed it from the oven, allow it to cool in the pan for 10 minutes. Then place a wire cooling rack over the base of the cake and invert the pan to release.

Chips, nuts, and dried fruit are tasty additions to many types of Bundt cake. To avoid add-ins sinking to the bottom of the cake, choose a cake that starts with thick batter. Stir add-ins into the thick batter before scooping it into the pan. Make sure your pan is large enough to accommodate add-ins.

Because Bundt pans are so deep and hold so much cake, Mark says you will have to lengthen the baking time. The oven temperature does not have to change. Most Bundt cake recipes are baked for 60 minutes or more. Check for doneness at the 45-minute mark.

Which Bundt pan is best for a 9" x 13" cake recipe? A. Joanne, bake your recipe calling for a 9″ x 13″ pan (or two 9″ round pans) in either a 10-cup or 12-cup Bundt pan. Increase the baking time by about 30% in the 10-cup pan, somewhat less in the 12-cup.

Many brands, including Nordic Ware, expressly advise against greasing a Bundt pan with traditional cooking spray, as the combination of aerosolized fat and dry heat can lead to a polymerized residue that's difficult to remove, especially over time.

CAKE: Use the middle rack when cake is thin (1 -3 inches) to avoid the cake from burning and for a softer, fluffier texture; Position rack in the lower third of the oven for cakes that are thicker (4 inches or higher like bundt, angel food cake, or pound cakes) so that the center of the cake still sits in the center of ...

Is it better to grease and flour a bundt pan? ›

Even if a bundt cake pan has a nonstick coating, it is best to grease and flour it to make sure the cake comes out easily. Nonstick cake pans lose adhesion with use and over time, so it is best to prepare the pan before baking as a preventative measure.

After removing from the oven, place the pan on a wire rack and let cool; your recipe will specify the required time, usually from 10-20 minutes. This allows the cake to become firm enough to remove from the pan without breaking apart. Cooling too long in the pan will cause the cake to be damp and stick to the pan.

Pro tip: Liquid fat (melted butter or oil) does a better job getting inside nooks and crannies of Bundt pans. Sugar can also be used in place of the flour for coating. This results in a crisp sugary crust on the finished cake. The sugar method is best for Bundts that won't be getting a frosting or glaze.

Your cake is often subject to sinking in the middle due to various factors, including inaccurate oven temperature, excessive or insufficient leavening agent, overmixing of the batter, or premature opening of the oven door. Moisture loss or incorrect ingredient ratios may also play a role.